RD Plastics / Dijkstra Round Tamper-evident Buckets.
 Standard tamper-evidence is the typical feature of the “GL” range of buckets.
From the tamper-evidence the end user can see that the bucket has not been opened before.The models indicated by an asterisk (*) can also be supplied with a superposed cover, so that these models can be provided with a seal foil.
Being completely made of one and the same material (PP), the buckets are much easier to recycle or reprocess otherwise. The environmental impact is therefore lower.
Versatile in use
- Suitable for food and non-food
- Sound and reliable
Produced under permanent quality control
- Fabricated using fist class copolymers
- Robust design for maximum load
Well thought out design
- Simple to stack
- Lids with user-friendly closure
Environmentally friendly
- Fully recyclable
- Non-noxious when incinerated
Versatile range
- Can be delivered in various sizes
- Containers and lids in different colours
- Razor-sharp decoration by screen print, dry offset and I.M.L.
- Can also be delivered with seal (superposed) lip
| Type |
|
Height (mm) |
Bottom (mm) |
Upper side (mm) |
Capacity (L) |
Handle |
| 0,8 |
GL* |
127 |
92 |
115 |
0,88 |
Plastic |
| 1 |
GL* |
109 |
111 |
137 |
1,05 |
Plastic/Steel |
| 1,1 |
GL |
101 |
124 |
147 |
1,14 |
- |
| 1,2 |
GL* |
126 |
109 |
137 |
1,2 |
Plastic/Steel |
| 1,3 |
GL |
101 |
130 |
156 |
1,3 |
- |
| 1,5 |
GL |
132 |
124 |
147 |
1,5 |
Plastic |
| 1,8 |
GL |
163 |
122 |
147 |
1,9 |
Plastic |
| 2 |
GL* |
128 |
175 |
200 |
2,8 |
Plastic/Steel |
| 2,3 |
GL |
153 |
144 |
170 |
2,48 |
Plastic |
| 2,4 |
GL* |
127 |
168 |
196 |
2,4 |
Plastic |
| 2,5 |
GL* |
138 |
174 |
200 |
3.1 |
Plastic/Steel |
| 3 |
FLP* |
110 |
202 |
240 |
3,5 |
Plastic/Steel |
| 3,4 |
GL* |
172 |
166 |
196 |
3,5 |
Plastic/Steel |
| 4,4 |
GAR* |
157 |
195 |
225 |
4,4 |
Plastic |
| 5 |
GL* |
173 |
202 |
240 |
5,3 |
Plastic/Steel |
| 5,2 |
GAR* |
183 |
196 |
225 |
5,3 |
Plastic |
| 5,5 |
GAR* |
197 |
195 |
225 |
5,7 |
Plastic |
| 5,5 |
GL* |
186 |
202 |
240 |
5,8 |
Plastic/Steel |
| 6 |
GL* |
214 |
200 |
240 |
6.7 |
Plastic/Steel |
| 7 |
GL* |
197 |
228 |
266 |
8,1 |
Plastic/Steel |
| 7,5 |
GL* |
213 |
229 |
266 |
8,7 |
Plastic/Steel |
| 8 |
GL* |
231 |
232 |
280 |
9,2 |
Plastic/Steel |
| 10,2 |
GL* |
265 |
225 |
266 |
10,7 |
Plastic/Steel |
| 10,3 |
GL* |
230 |
253 |
290 |
11.3 |
Plastic/Steel |
| 10,4 |
GL* |
256 |
232 |
280 |
10,9 |
Plastic/Steel |
| 10,5 |
GAR |
250 |
243 |
290 |
11,5 |
Plastic/Steel |
| 11 |
GAR |
242 |
257 |
300 |
12,4 |
Plastic/Steel |
| 12 |
GL* |
262 |
251 |
290 |
13,1 |
Plastic/Steel |
| 15,5 |
GL |
262 |
282 |
328 |
15,9 |
Plastic/Steel |
| 16 |
GL |
282 |
280 |
328 |
16,7 |
Plastic/Steel |
| 20 |
GL |
350 |
273 |
328 |
21,0 |
Plastic/Steel |
| 22 |
GL |
392 |
272 |
328 |
23,2 |
Plastic/Steel |
| 30 |
GL |
392 |
319 |
382 |
31,8 |
Steel |
|
|
Product Lines:
MFL - Round non-tamper evident
GL - Round tamper evident
RF - Rectangular buckets
VK - Square tamper evident
|
